Input Power Boards

These breadboard-compatible board breaks out 9V, 5V, and 3.3V from a 9V battery or any other input power source that works with the voltage regulator.

The board comes in a through-hole and a surface mount version.

The KiCad schematic and layout, along with the bill of materials, are available at the Github repo. The project is released as open hardware under the CERN v1.2 Open Hardware license.

Through-Hole v1.1

You can order the boards from OSH Park from this shared project. OSH Park detects a 2 layer board of 1.65x1.03 inches (42x26mm). $8.40 for three.

The Github repo has the bill of materials and assembly instructions.

Surface Mount v1.1

You can order the boards from OSH Park from this shared project. OSH Park detects a 2 layer board of 1.53x1.15 inches (39x29mm). $8.70 for three.

The Github repo has the bill of materials and assembly instructions.

License

These projects are released under the CERN Open Hardware v1.2 License.